A Logistics Town Ships Its Own Sign.
Coppell sits in the corner of Dallas County where the warehouses meet the neighborhoods. Freeport Parkway and the distribution buildings on one side, Old Town and the shops along Denton Tap on the other, DFW Airport close enough to hear. Our prepared DIY LED sign kits ship to both halves of that with the lighting already mounted in the frame.
You are paying suburban Dallas rent. There is no reason to also pay a full-service sign crew for a job you can do with a helper and a drill. We weld the aluminum cabinet to your size and ship it in sections. You install it and keep up to 60% depending on your project.
The Lighted Sign Cabinet, Built To Your Size
Get Your Custom Quote
Every kit is cut to your exact size, so every quote is written for your project: frame depth, width and height, single- or double-sided, and ground shipping to Coppell, TX. Tell me what you need and you’ll get a straight, written quote from the guy who builds it.
Shipping To Coppell And Every Town Around It
Kits ship to Irving, Lewisville, Carrollton, Grapevine, Valley Ranch, Flower Mound, Farmers Branch and Las Colinas — and everywhere in between. If FedEx delivers there, your sign kit can too.
There is something fitting about a kit arriving by ground in a town that moves freight for a living. Coppell knows what a shipment looks like — the difference here is that this one needs no dock, no forklift and no bill of lading. Four boxes, sometimes six, off the back of the usual delivery route. Before you order anything, confirm the sign rules that apply to your address and get your approved size in writing, because the cabinet is welded to that number.
Call it what you like — an illuminated cabinet sign, a light box sign, or an outdoor lighted sign box — it’s the same product: an aluminum LED sign cabinet, built in our shop and shipped to your door as a ready-to-assemble kit.
Every prepared kit includes: an aluminum frame cut to your size with welded corners, LEDs mounted inside, and a 12-volt power supply with wiring hardware as listed in your written quote. Sign faces and graphics are available separately through DIY Graphics.
Programmable LED Message Center Signs
A lot of Coppell owners shopping for a lighted sign are really after the changeable kind — a programmable LED sign that shows something different tomorrow than it does today. That product goes by a pile of different names: an electronic message center (EMC), an LED message board, an outdoor LED display, a scrolling LED sign or a digital marquee sign. They all describe the same thing — a grid of LEDs you update yourself from a phone, tablet or computer.
The usual setup on a Coppell storefront or roadside pole is both signs together: the lighted cabinet up top carrying your business name permanently, and the message center below it carrying today’s special, price, hours or announcement. One says who you are. The other says what is happening right now.
Check this before you order. Many towns around Coppell regulate electronic message centers separately from static signs, and limits on brightness, hold time, dwell time and animation are common. Confirm the rules with your local township or zoning office first — the same as you would for any freestanding sign. Easy financing available; ask about it when you request your written quote.
How Your Kit Gets To Coppell
Coppell is a straightforward ground-shipping address. Roughly 95% of our kits move FedEx Ground rather than freight, and this is exactly the kind of town that route was built for — office parks off Belt Line, retail bays along Denton Tap, and small industrial suites near Freeport Parkway that already see a delivery van most mornings.
What shows up. Four long boxes for a standard cabinet. Six on larger kits, where splice joints let a longer frame stay inside ground shipping limits. LEDs come mounted inside the welded sections, and the power supply and mounting hardware are packed in with them, so there is one delivery and no separate parts crate trailing behind it. Open the boxes, lay the sections out, and everything for the assembly is right there.
Delivery day. Nothing to schedule. No liftgate charge, no pallet jack, no waiting on a four-hour window while a customer stands at your counter. If you run a suite in one of the flex buildings out near the airport, you already know how much easier a hand-carried box is than an appointment. One person can move these.
Open the boxes the day they land. Look the sections over even if the cartons look perfect, and do it before install day rather than the morning of. Photograph anything crushed, torn or bent and keep the packaging exactly as it arrived — that is what a carrier claim is built on. Finding a problem the day a box shows up is a phone call; finding it with a crew standing on a ladder is a lost day.
Where to put it. North Texas weather is the reason to bring the boxes inside the day they land. Aluminum shrugs off heat and cold and it does not rust, but spring here means hail and sideways rain, and the LEDs and power supply are packed in cardboard. A garage, a stockroom or a corner of the warehouse keeps them dry until install day.
Measure Twice. Order Once.
Your kit is cut to a size, welded, and pre-lit before it ships, so the size has to be right the first time. In Coppell that means three phone calls before you order, not after.
1. Ask what you're allowed
Start with the City of Coppell — a smaller city usually means you can talk to an actual person about your sign before you spend money. Coppell is mostly in Dallas County with a piece extending north, so confirm which authority reviews your address. Irving, Lewisville, Carrollton and Grapevine all run their own sign codes and none of them match Coppell's. Ask for the maximum sign area and height for your zoning district, whether your sign counts as wall-mounted or freestanding, and what setback applies. Sign area is usually tied to your building frontage, so the answer is specific to your address — not to the block or to the business next door.
2. Ask your landlord
If you're in a plaza or center, the landlord's sign criteria sit on top of the city code and are often stricter. Cabinet depth, face color, letter height and mounting method are all commonly spelled out. Get the criteria sheet in writing before you pick a size — it is cheaper than rebuilding a cabinet that the center won't approve.
3. Ask about engineering and wiring
For a pole or monument sign, expect to need a foundation and structural drawing sealed by a Texas-licensed engineer, sized for North Texas wind speeds. An illuminated cabinet commonly needs its own electrical permit in addition to the sign permit. Ask the city which submittals they want before you commit to a size. Plan on a licensed electrician for the final hookup and inspection either way. We build the cabinet; the permit, the footing, the disconnect and the sign-off are local work done by local people.
DIY Kit vs. Hiring A Coppell Sign Company
The short answer: a full-service sign company sells a finished project — survey, fabrication, installation — and prices it that way. We are not a Coppell sign installation company. We build the lighted sign cabinet itself, ship it to your door, and coach you while you or your contractor handle the install. That one difference is where the savings come from.
| What happens | Full-Service Sign Company | DIY Sign Guy Kit |
|---|---|---|
| Who builds the cabinet | They do | We do — cut to your size, LEDs mounted inside |
| Who installs it | Their crew | You, or a local contractor you hire |
| What you pay for | The finished project: fabrication, crew time, travel and markup | The prepared kit only — get your custom quote |
| Permits & inspections | Usually handled for you | You check with your township — we help plan a cabinet that fits the rules |
| Best fit | Complex installs, no time to coordinate | Owners and contractors comfortable with bolts, a level, and an electrician for hookup |
Savings depend on your project and are potential, not guaranteed. Get your custom quote to see the numbers for your sign.
Lighted business sign kits shipped to Coppell, quoted to your size
| Frame depth | Typical use |
|---|---|
| 4-inch — most popular | Wall-mounted storefront signs |
| 7-inch | Wall installs and double-pole signs |
| 10-inch | Pylon and single-pole roadside signs |
Every kit is pre-lit with a 12-volt power supply included as quoted. Sign faces and graphics are quoted separately. Your price depends on size, depth and options — get your custom quote.
Straight Answers For Coppell Businesses
My unit is in a business park with a sign standard. Does that work?
Usually better than average, since property managers care most about size and placement, and the cabinet is welded to whatever dimensions you give us. Get the approved size and mounting location in writing from the property manager first, then send us that number. Building to a spec is easier than building to a guess.
Will this ship as freight instead?
Rarely. Freight is the exception here, saved for cabinets too long to splice down, pole and pylon projects, and large multi-sign orders. Roughly 95% of kits go FedEx Ground in four boxes, or six with splice joints, which is why there is no dock or appointment involved.
What does Coppell require for a lighted sign permit?
Assume a permit is required. Sign permits generally go through the City of Coppell, and because the cabinet is lit, expect the electrical to be permitted on its own as well. If your building sits in a business park, your landlord's sign criteria may be stricter than the city's, so clear both. Confirm the approved dimensions in writing before you order — we weld to that size.
Who handles the wiring at the end?
A licensed electrician, every time. Our kits are not UL listed, and tying a lighted cabinet into building power is permitted and inspected work in Dallas County. You can do the assembly, the mounting and the faces yourself. Line the electrician up early so the sign is not sitting dark while you wait on a callback.
How much does a lighted business sign cost in Coppell?
It depends on the size, the frame depth, single- or double-sided, and shipping to your address, so every kit is quoted in writing to your exact size. Because you skip the full-service fabrication and installation labor, a prepared kit usually costs far less than a finished sign from a full-service company. Savings are potential, not guaranteed. Sign faces and graphics are quoted separately. Send your sizes through the quote form and you'll get a straight, written quote.
Do you install signs in Coppell?
No — we are not a Coppell sign installation company, and that is exactly why the price works. We build and ship the lighted cabinet; you or a local contractor handle the mounting, with a qualified electrician for the electrical hookup. Real guidance from the builder comes with every kit, and your local township sets the permit and inspection rules.
Do you sell programmable LED message center signs in Coppell?
Yes. An LED message center — also called an electronic message center, an EMC, a programmable LED sign, an LED message board or a digital marquee — is an outdoor display built into a sign that you change yourself from a phone, tablet or computer. It ships to Coppell the same way our lighted cabinets do, and it is quoted in writing to your size. Many towns regulate message centers separately from static signs, so confirm brightness, hold time and animation rules with your local township before ordering. Easy financing available — ask when you request your quote.
What is the difference between a lighted cabinet sign and an LED message center?
A lighted cabinet sign shows one fixed printed face and lights it from behind — it carries your business name permanently. An LED message center shows changeable messages you update whenever you want. Most businesses run both on the same structure: the cabinet on top for the name and logo, the message center below it for today's special, price or hours.
What is an illuminated cabinet sign?
An illuminated cabinet sign — also called a light box sign — is an aluminum box with lighting inside and translucent faces: the classic lighted sign above a storefront. Ours ships as a prepared kit with the frame cut to your exact size, LEDs already mounted inside, and a 12-volt power supply included as quoted.
Answers by Dean, the DIY Sign Guy — building signs since 2004.
Get Your Custom Quote For Coppell, TX
Tell me what you need and I’ll send you a straight, written quote — from the guy who actually builds it. No showroom visit, no pressure.